|
|
|
|
The MCK-ZS series intelligence display
control meter stable property is reliable, survey accurate
direct-viewing, has the communication, the printing connection, 6 kind
of warning mode selection, the automatic/manual reset, the peak value
memory, the simulation, the frequency, the switch quantity
transformation, the input, the closed loop relay, functions and so on
D/A control output. May as the pressure, the pulling force, the weight,
the displacement, the temperature and so on survey and the control.
MCK-ZS-type：80H×160W×145Dstandard
cartridge case
Dial opening size152×76 mm
  Download
|
Specification |
|
Input modes |
analogue signals, digital signals, frequency signals, switching
signals and
outputs of various sensors with linear output |
|
Amplifying circuit |
high-precision amplifier circuit |
|
sampling speed |
5/sec |
|
response speed |
about 0.3 seconds |
|
Accuracy |
±0.1%(FS)(23℃±5℃) |
|
Display |
real-time detection, peak ,alarm value, etc. PV: -19999 ~
19999, SV: -1999 ~ 9999, free to set the decimal point
PV: 0.56 -inch, SV: 0.39-inch
high-brightness
LED |
|
Communications/printing interface |
Standard serial
port RS-232/485 bi-directional
port,
multi-address code : 0 ~ 255 |
|
Communication baud rate |
150、300、600、1200、4800、9600、19200bps
set
arbitrarily |
|
Warning output |
optional single-point, low-high
limit from inside or outside Great Upper-limit or small
lower-limit |
|
Binary output |
relay contact 0.6A(220VCA),
2A(30VDC) |
|
Analog output |
0~5V、1~5V、0~10mA、4~20 mA
optional |
|
Power |
220V50Hz |
|
Operating temperature |
-10~50℃ |
|
|
